TMO Replacement Neck for Telecaster®

Unfinished Fender® licensed replacement neck for Telecaster® guitars.

21 vintage frets (.079 x .043 inch)
Solid 1 piece sanded maple
Standard shape and profile
7.25 inch radius
Nut width 1-5/8 inch
Heel width 2-3/16 inches
Tuning peg hole diameter .340 inch
Truss rod adjustment at heel
Neck thickness .85 inch at first fret, .96 inch at twelfth fret

Due to size, this product may cost more to ship than the rate quoted on allparts.com

This neck is made of the highest quality wood in either the United States or Japan. No two necks are exactly the same in grain pattern and all will vary from the product pictured. This neck has a Limited Warranty against defects in materials and workmanship. Warranty does not cover normal fret wear or customer modifications.

This neck is licensed to Allparts Music Corporation by Fender^® Musical Instruments under a quality control trademark license. Allparts Music Corporation is not affiliated with Fender^® and no Fender^® warranty applies.

All Fender® licensed Allparts necks are marked as such on the heel.

All necks may require fret leveling and polish, and may need to be fine tune to fit your instrument. This is normal and not a defect. All necks should be carefully inspected prior to installation and/or modification. All wood is unique with individual growth patters. Allparts cannot warranty a neck that does not get a sealer/finish put on it, as humidity, sweat, and temperature can cause the neck to warp and twist.