MESA/Boogie CabClone Cabinet Simulator w/ Built-In Amp Load & HP Output -16Ohms

MESA/Boogie CabClone Cabinet Simulator with Built-In Amp Load & Headphone Output

The CABCLONE is a passive Cabinet Simulator/Speaker+Mic alternative with a built-in Amp Load. It provides a direct interface of your guitar amp’s Speaker Output to the input of a mixing console, microphone preamp or even direct to your converters (recorder) with or without the need for a speaker cabinet. It’s also a Compensated Headphone Driver that delivers a great sounding, great feeling headphone-friendly version of your amp’s Tone that’s perfect for late night practice sessions or anytime you want to play without others listening.

SPECIFICATIONS:

• Designed and Handcrafted in Petaluma, California, USA
• Passive Design – No Power Supply Required
• Built-In Internal Amp Load FOR AMPS RATED 100 WATTS OR LESS (auto-activates when no cable is connected to “Thru” Output)
• 1/4" “Input” Jack (receives signal from amp's speaker output)
• 1/4" “Thru” Output Jack (defeats to Internal Load when no cable is connected)
• 3-Position Cabinet Voicing Switch - Open-Back, Closed-Back & Vintage Closed-Back Cabinet Simulations
• Variable -30 to +4db DI Output Level Control with presets for Dynamic Mic Level (-30db), Instrument Level (-10db) & Line Level (+4db)
• Balanced XLR Direct Output (controlled by the Variable DI Output Level Control)
• Independent 1/4" +4 Line Level “Slave” Output Jack (exact signal from amp's speaker output, non-simulated)
• Compensated Headphone Output Jack (defeats balanced outputs when used)
• Phase Switch – Normal (In) or Reverse (180°)
• Ground Lift Switch
• Removable Tilt-Back Stand (for use over an amp handle)

FORMATS

• 4 Ohm – For amps rated 100 watts or less
• 8 Ohm (standard) – For amps rated 100 watts or less
• 16 Ohm – For amps rated 100 watts or less

WEIGHTS & DIMENSIONS

• Dimensions (W/D/H): 6.7" x 6.40" x 2.30" without tilt-back stand (3.30” with tilt back stand) 170.18mm x 162.56mm x 58.42mm without tilt-back stand (83.82” with tilt back stand)
• Weight: 2.3lbs (1.04Kg) WITH Tilt-Back Stand
/ 2.2lbs (.998Kg) WITHOUT Tilt-Back Stand

 Every instrument & amp that we ship out is fully tested and carefully inspected for quality, tone and condition. A seasoned technician with over 20 years of experience gives the instrument a free setup for optimum playability and new strings are put on if needed before delivering it to our customers.

Give us a call for an in-hand description! 281-338-1830